AirTies WOB-201 Manual de usuario descargar pdf (Pagina 19)

AirTies WOB-201 User Manual

3.2.2.

Operation Mode Selection

The WOB-201 can operate as a Bridge, a Repeater, or an Access Point.

To set the operation mode, go to the Operation Mode submenu under the WIRELESS

menu. The Operation Mode Selection window will appear. In this window, select the

mode that you want your WOB-201 to operate in and click "Save".



Checking the "Wireless Network Enabled" box enables/disables the wireless network.



In the "Wireless Network Name (SSID)" field, you can enter a name (SSID) for your

wireless network.



Checking the "Hide" box hides the SSID in the WOB-201 broadcast.



In the "Channel" field, you can select the channel in which you would like the WOB-

201 to broadcast.



The "Data Rate" field lets you adjust the wireless data rate of the WOB-201. This value

is selected automatically. Changing it is not recommended



In the "Mode" field you can select the wireless mode the WOB-201 will be operating

in. A mixed mode of 802.11b and 802.11g is selected by default so that devices that

comply with either standard can communicate with the WOB-201.



In the "Wireless Transmit Power" field, you can set the Transmit Power of the WOB-201.

The lower the transmit power, the smaller your wireless range will be.

IMPORTANT: The maximum RF transmit power for the WOB-201 is 17 dBm. By default the

"Wireless Transmit Power" is set to 6 dBm, appropriate for the 14 dBm internal antenna.

If you are using an external antenna with a different gain you should adjust this value

accordingly.

Click "Save" when you are done with all the settings.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

Sin comentarios

AirTies WOB-201 Manual de usuario Pagina 19