
6
AirTies WOB-201 User Manual
2.2.
A typical WOB-201 Configuration
2.3.
Hardware Installation
The WOB-201 installation should be done in the following sequence:
1. Mount the WOB-201 outdoors and ground it properly
2. Connect the Ethernet cable to WOB-201 and tighten the weatherproof connector
3. Connect the Ethernet cable to the Ethernet Surge Arrestor immediately after entering
the building and ground the Ethernet Surge Arrestor.
4. Connect the PoE power adapter (located indoors) to the Ethernet Surge Arrestor
5. Connect the PoE power adapter to a Router or Switch
6. Connect power
Comentarios a estos manuales